Product Description
Features: This series of pumps has the characteristics of energy saving, anti-corrosion and anti-wear, low vibration, low noise, reliable operation, long service life, and easy maintenance. It can be widely used in desulfurization systems for industries such as thermal power plants, aluminum refineries, and oil refineries to transport limestone or gypsum slurry. The allowable chloride ion content in the slurry is 60000ppm, and the pH value of the slurry is allowed to be between 2.5-13. Example of model meaning: 300DT-I-A60B1.300- pump outlet diameter mm2. DT - horizontal desulfurization pump 3. I - overcurrent component material. I=C1, II=C2, III=C3, GLH-5 does not indicate 4. A -- number of impeller blades (A=5, B=4, C=3, D=2, E=1, F=6, G=7) 5.60-- impeller diameter mm6. B -- special structure code. B represents half open impeller. Normal structure does not represent
Installation & Maintenance Notes
- 1 Before first start-up, check the motor rotation direction and make sure it matches the pump direction.
- 2 Every time before starting, turn the shaft by hand through one full revolution — it must turn freely without jamming or rubbing.
- 3 Keep a 2–3 mm clearance at the coupling.
- 4 Grease the bearings regularly every shift.
Related Products
Hydraulic Sand Pump
Selection of hydraulic sediment pump: 1. Select the pump type according to the actual flow rate, head, and delivery distance required for the operating conditions, and calculate the required hydraulic power based on the motor power of the pump type; 2. The hydraulic power calculated based on the selected pump type matches the hydraulic oil station that can meet the hydraulic power requirements; 3. Calculate the actual output power of the excavator hydraulic system and select the appropriate pump type; 4. Customized modifications can also be made according to specific customer requirements (such as screw type, rake suction type, bucket wheel type). Drive mode: hydraulic drive Material used: high chromium wear-resistant alloy Additional mixing: dual agitator type, single twist cage
NL80-300-11 Vertical Slurry Pump
Attention: 1. Before starting up, test the motor rotation direction, which should be consistent with the pump rotation direction before starting up. 2. Rotate the pump manually for one week before each start-up, and only start when there is no jamming or grinding. 3. Leave a gap of 2-3 millimeters between the couplings. 4. Add butter on time for each shift. This pump has the advantages of long service life, simple structure, and reliable performance. The sealing type is oil seal type, and the overcurrent components have two types: ordinary wear-resistant and high wear-resistant. Note: Two leaves with a particle size of 70 millimeters.
6PS-30 Diesel Engine Horizontal Pump
3PNL-22 Vertical Slurry Pump
Attention: 1. Before starting up, test the motor rotation direction, which should be consistent with the pump rotation direction before starting up. 2. Rotate the pump manually for one week before each start-up, and only start when there is no jamming or grinding. 3. Leave a gap of 2-3 millimeters between the couplings. 4. Add butter on time for each shift. This pump has the advantages of long service life, simple structure, and reliable performance. The sealing type is oil seal type, and the overcurrent components have two types: ordinary wear-resistant and high wear-resistant. Note: Two leaves with a particle size of 70 millimeters.