Product Description
This series of pumps is a single-stage, double suction, horizontal open type centrifugal pump, suitable for pumping clean water and non corrosive liquids. The medium has a high temperature of 80 ℃. After the bearing body is filled with cooling water, it can transport hot water below 130 ℃. Changing the materials of the sealing ring, shaft sleeve, and impeller can transport turbid water containing sediment. Changing the material of pressure bearing parts can increase the inlet pressure of the pump. The shaft seal of the pump is generally sealed with soft packing. If there are special requirements, mechanical seals can also be modified. Looking at the pump from the direction of the motor, it rotates counterclockwise. According to user requirements, it can also be changed to clockwise rotation. According to the regulations of the water pump industry, the Sh and S series of medium open pumps coexist until a new type of pump is uniformly designed to replace these two series. This product is mainly used for water supply, agricultural drainage and irrigation in factories, mines, cities, power stations, pumps for various water conservancy projects, and heating and air conditioning systems.
Installation & Maintenance Notes
- 1 Before first start-up, check the motor rotation direction and make sure it matches the pump direction.
- 2 Every time before starting, turn the shaft by hand through one full revolution — it must turn freely without jamming or rubbing.
- 3 Keep a 2–3 mm clearance at the coupling.
- 4 Grease the bearings regularly every shift.
Related Products
250BSZ-132 Horizontal Sand Suction Pump
Attention: 1. Before starting up, test the motor rotation direction, which should be consistent with the pump rotation direction before starting up. 2. Rotate the pump manually for one week before each start-up, and only start when there is no jamming or grinding. 3. Leave a gap of 2-3 millimeters between the couplings. 4. Add butter on time for each shift. This pump has the advantages of long service life, simple structure, and reliable performance. The sealing type is oil seal type, and the overcurrent components have two types: ordinary wear-resistant and high wear-resistant. Note: Two leaves with a particle size of 70 millimeters.
6PS150-16.0 Sand Suction Pump
Marine & Land Dual-Use Sand Pump
The PNS type sediment pump is a large flow, single-stage single suction, horizontal commercial center pump developed by our factory based on the theory of two-phase flow. It is divided into 200mm, 250mm, 350mm, 400mm, 450mm, 500mm, and 550mm according to the suction diameter. This series of Mud Sand Dong has innovations in water conservancy design and structural design. The overcurrent components are made of high-strength alloy steel, which is resistant to strong abrasion and has high efficiency, long service life, reasonable structure, easy operation, low vibration, low exposure, and convenient maintenance. Suitable for marine suction of mud and sand, used for land reclamation and dock construction in the sea: can also be used
Trenchless Pipe-Jacking & Shield Accessories
Complete accessory package for trenchless pipe jacking and shield tunnelling: motors, cables, distribution cabinets, couplings, slurry hose, UHMWPE wear-resistant pipe, check valves, shaft-port sealing rings (Φ500–Φ3500), clamps, duckbill valves and more.