製品データ

04.30吸沙泵处理后.jpg


Attention: 1. Before starting up, test the motor rotation direction, which should be consistent with the pump rotation direction before starting up. 2. Rotate the pump manually for one week before each start-up, and only start when there is no jamming or grinding. 3. Leave a gap of 2-3 millimeters between the couplings. 4. Add butter on time for each shift. This pump has the advantages of long service life, simple structure, and reliable performance. The sealing type is oil seal type, and the overcurrent components have two types: ordinary wear-resistant and high wear-resistant. Note: Two leaves with a particle size of 70 millimeters.




Installation & Maintenance Notes

  1. 1 Before first start-up, check the motor rotation direction and make sure it matches the pump direction.
  2. 2 Every time before starting, turn the shaft by hand through one full revolution — it must turn freely without jamming or rubbing.
  3. 3 Keep a 2–3 mm clearance at the coupling.
  4. 4 Grease the bearings regularly every shift.

関連商品

S/SHシリーズ 単段二吸入口遠心ポンプ

S/SHシリーズ 単段二吸入口遠心ポンプ

このシリーズのポンプは、単段、二重吸入、水平開放型遠心ポンプであり、きれいな水や非腐食性液体の揚送に適している。媒体は80℃の高温である。ベアリングボディに冷却水を充填した後、130℃以下の高温水を輸送できる。シールリング、シャフトスリーブ、インペラの材質を変更することで、濁った水中の堆積物を含む水を輸送できる。圧力ベアリング部品の材質を変更することで、ポンプの吸入圧力を高めることができる。ポンプのシャフトシールは一般的に軟材パッキングで密封されている。特別な要求がある場合は、メカニカルシールにも変更可能である。モーターの方向からポンプを見ると、反時計回りに回転している。ユーザーの要求に応じて、時計回りの回転にすることもできる。水ポンプ業界の規定に従い、ShシリーズおよびSシリーズは

6PS150-16.0 砂吸揚ポンプ

6PS150-16.0 砂吸揚ポンプ

海上・陸上両用砂泵

海上・陸上両用砂泵

PNS型泥砂ポンプは、当社工場が二相流理論に基づいて開発した大流量、単段単吸込み、水平商用センター軸ポンプであり、吸込み径により200mm、250mm、350mm、400mm、450mm、500mm、550mmの6種類に分かれている。このシリーズの泥砂ドングは水利設計と構造設計に革新を施しており、過電流部品は高強度合金鋼製で、強力な磨耗に耐え、効率が高く、長寿命、合理的な構造、操作が容易、振動が少なく、露出が少なく、メンテナンスが便利である。海面の泥砂吸込みに適し、土地造成や海中の埠頭建設に使用され、また

非開削パイプラインジャッキング・シールドアクセサリー

非開削パイプラインジャッキング・シールドアクセサリー

非開削パイプラインジャッキングおよびシールドトンネリング用の完全アセスソリューション:モーター、ケーブル、配電盤、カップリング、スラリーホース、超高分子量ポリエチレン耐摩耗パイプ、チェックバルブ、シャフトポートシーリングリング(Φ500~Φ3500)、クランプ、タッピーバルブその他。